吾爱破解 - 52pojie.cn

 找回密码
 注册[Register]

QQ登录

只需一步,快速开始

查看: 105|回复: 2
上一主题 下一主题
收起左侧

[资源求助] 哪位有redhat的订阅账号,帮忙打开一下这个链接,看看该问题解决方案是什么

[复制链接]
跳转到指定楼层
楼主
曾经养过狗 发表于 2026-5-6 11:52 回帖奖励
88吾爱币
哪位大佬有redhat的订阅账号,帮忙打开一下这个链接,看看该问题解决方案是什么?

最佳答案

查看完整内容

Resolution This sequence of errors suggests a problem below the OS layer, involving the hardware, firmware, or physical media. Please consider the following actions and contact your hardware and/or driver vendor for support. Run Hardware Diagnostics: Execute diagnostic tools provided by the server, HBA, and tape drive vendors to check for hardware faults. Check Firmware Versions: Ensure that ...

发帖前要善用论坛搜索功能,那里可能会有你要找的答案或者已经有人发布过相同内容了,请勿重复发帖。

沙发
weiyepin 发表于 2026-5-6 11:52
Resolution
This sequence of errors suggests a problem below the OS layer, involving the hardware, firmware, or physical media. Please consider the following actions and contact your hardware and/or driver vendor for support.
Run Hardware Diagnostics:
Execute diagnostic tools provided by the server, HBA, and tape drive vendors to check for hardware faults.
Check Firmware Versions:
Ensure that the firmware for the HBA and the tape drive are updated to the latest versions recommended by the vendor.
Replace the Tape Media:
Attempt the write operation with a new or known-good tape cartridge to isolate whether the issue is related to a specific faulty tape.
Check Physical Connections:
Verify that the SAS or Fibre Channel cables between the tape drive and the server are securely connected and not damaged.
Contact Vendor Support:
If the issue persists after these checks, contact support for your hardware vendor (server, HBA, HPE Ultrium Tape Drive), providing the collected logs.
Root Cause
The fundamental cause of this issue is that a write I/O request sent to the tape drive is not completing within the expected time.
An application issues a write request to the tape drive (st device).
For some reason (e.g., a hardware malfunction, faulty media, or a firmware issue), the tape drive stops responding to the I/O request.
The kernel waits for a response, causing the process that issued the request to become blocked in the D (uninterruptible sleep) state. This appears as the task ... blocked message.
After a certain period, the HBA's smartpqi driver detects a command timeout and initiates an error recovery sequence. This includes aborting the command (TASK ABORT) and resetting the device.
Even after the device reset, the physical write operation fails, ultimately resulting in a Medium Error.
This sequence of events indicates that the OS is timing out while waiting for a response from the hardware, strongly suggesting the problem lies at the physical layer rather than with the OS or application.
Product(s) Red Hat Enterprise LinuxComponent StorageCategory TroubleshootTags drivers hp tape
This solution is part of Red Hat’s fast-track publication program, providing a huge library of solutions that Red Hat engineers have created while supporting our customers. To give you the knowledge you need the instant it becomes available, these articles may be presented in a raw and unedited form.
3#
 楼主| 曾经养过狗 发表于 2026-5-6 11:53 |楼主
您需要登录后才可以回帖 登录 | 注册[Register]

本版积分规则

返回列表

RSS订阅|小黑屋|处罚记录|联系我们|吾爱破解 - 52pojie.cn ( 京ICP备16042023号 | 京公网安备 11010502030087号 )

GMT+8, 2026-5-7 07:21

Powered by Discuz!

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表